Same Day Shipping
On many popular products
- Shop Products
Tech Support
Speak to our experts
Total Security
Safe & Secure checkout
hospitals
We accept Purchase Orders
- Shop Your OEM
- About Us
- Helpful Resources
- Contact Us
Showing all 6 results
Ancillary Device Connections, Boom Cabling Systems, ECG Cables, IBP Cables, Interconnect, Monitor slave cables-adapters, Multiplier Cables
Connects Philips Healthcare monitor or Maquet-Datascope balloon pump output to Edwards LifeSciences CCO monitor, or Philips-Siemens ultrasound input.
i cable ECG or IBP. 1/4″ phone plug output of the Philips monitor or balloon pump to Philips/Siemens ultrasound or Edwards LifeSciences Vigilance II , HemoSphere monitor, 1/4″ AUX ECG input. Also connects the 1/4″ IBP output jack of the MAGUIRE 257 Series Multiplier or MAGUIRE 414 Series Boom Cabling System to the balloon pump, continuous cardiac output monitor or ultrasound, AUX ECG input. Maguire 257 and 414 Series Interconnect systems are designed to deliver synchronized waveforms and simultaneous audio signal transfer onto multiple device displays. Learn how these low cost products simplify patient setup, reduce cable clutter and enhance any physiologic monitoring system.
Adapts the Physio Control LifePak or Zoll Medical defibrillator blood pressure input to accept a Philips Healthcare invasive pressure cable.
Adapter -Input- Philips Healthcare 12 pin IBP input to Physio-Control LifePak LP12, LP15; Zoll M, X and CCT Series Defibrillators MS 6 pin IBP input. 6 inch length.
Extends the 1/4″ phone plug cable connection.
i cable Extension. 1/4″ two circuit phone plug adapted to 1/4″ two circuit phone jack. For use with AUX ECG or IBP inputs. 6 foot length.
Adapts the Zoll Medical defibrillator input to accept a Philips Healthcare pressure cable.
i cable IBP Adapter. Philips Healthcare 12 pin invasive blood pressure cable adapted to mate with the Zoll X and M Series defibrillator, MS 6 pin IBP input. When tethered to the defibrillator or defibrillator crash cart, it enables a compatible connection for speedy diagnosis and delivery of care.
Connects Philips Healthcare blood pressure module to Maquet-Datascope balloon pump input.
i cable IBP. 1/8″ (3.5mm) three circuit phone plug output of the Philips blood pressure module to the Maquet-Datascope balloon pump, 1/4″ (6.35mm) three circuit phone plug AUX IBP input.
Adapts Philips IBP module or Zoll M Series defibrillator single ECG output to be three outputs.
i cable ECG or IBP Multiplier. 1/8″ (3.5mm) three circuit phone plug IBP output of Philips blood pressure module or ECG output of the Zoll M Series defibrillator adapted to be three 1/4″ (6.35mm) phone jacks. Allows simultaneous connection to a defibrillator, balloon pump, ultrasound, pacer programmer or other physiologic monitor via MAGUIRE multiplier cables (excluding bifurcated dual signal cables). Learn how these low cost products simplify patient setup, reduce cable clutter and enhance any physiologic monitoring system.