Our defib slave cables and adapters allow the the ALS defibrillator to receive physiologic signal from the primary patient monitor; or visa versa, allows the defibrillator to advance signal to a secondary peripheral monitor. Cables and adapters transfer ECG or IBP signal from the host device to a slaved one.

Showing 1–12 of 34 results

Show sidebar
Part #: ME590006K

Connects Philips Healthcare monitor or Maquet-Datascope balloon pump to Physio Control LifePak defibrillator input.

i cable ECG. 1/4″ phone plug output of the Philips monitor or  balloon pump to the LifePak defibrillator LP12, LP15, LP20, LP20e with code management module, 12 pin ECG input. This cable is also compatible with MAGUIRE 257 Series Multipliers and MAGUIRE 414 Series Boom Cabling System, each designed to deliver synchronized waveforms and simultaneous signal transfer onto multiple peripheral device displays. Learn how these low cost products simplify patient setup, reduce cable clutter and enhance any physiologic monitoring system.

Part #: ME590335

Connects Philips Healthcare monitor or Maquet-Datascope balloon pump output to Zoll Medical defibrillator input or ultrasound input.

i cable ECG. 1/4″ phone plug output from the Philips monitor or Maquet-Datascope balloon pump to the Zoll R, X and M series defibrillator ECG input. Also from the Philips monitor to the balloon pump input or ultrasound, AAMI 6 pin ECG input. This cable is compatible with MAGUIRE 257 Series Multipliers and MAGUIRE 414 Series Boom Cabling System, each designed to deliver synchronized waveforms and simultaneous signal transfer onto multiple peripheral device displays. Learn how these low cost products simplify patient setup, reduce cable clutter and enhance any physiologic monitoring system.

Part #: ME584F

Connects Edwards disposable transducer cable output to Physio Control LifePak or Zoll Medical defibrillator input.

i cable IBP. Output of the Edwards TruWave disposable transducer cable to the LifePak LP12, LP15 or Zoll X, M  Series defibrillator, MS 6 pin IBP input.

Part #: ME590030

Adapts the Zoll Medical defibrillator patient ECG input to accept a Philips Healthcare patient cable.

i cable ECG Adapter. 12 pin Philips ECG patient cable adapted to mate with ZOLL X, R, M series defibrillator, AAMI 6 pin ECG input. When tethered to the defibrillator or defibrillator crash cart, it enables a compatible connection for speedy diagnosis and delivery of care.

Part #: ME590009XRN

Connects Zoll R Series defibrillator output to Philips Healthcare monitor, ultrasound input.

i cable ECG.  7 pin ‘Sync In/Marker Out’ of Zoll R Series Defibrillator (model #AF14B034866 and higher or older models which were retrofitted with the female ECG output connector) to the  Philips monitor or ultrasound, 12 pin ECG input.

Part #: ME550ZRN

Adapts Zoll R Series defibrillator output to Cardiac Rhythm Management Pacer Programmer cables.

i cable ECG Adapter. 7 pin ‘Sync In/Marker Out‘ of Zoll R Series defibrillator (model #AF14B034866 and higher or older models which were retrofitted with the female ECG output connector) adapted to mate with CRM pacemaker programmer cables via the 1/4″ two circuit phone jack. See also our multi-defibrillator adapter, part# ME550DFB3.

Part #: ME550DFB3
Part #: ME590185K

Connects GE Healthcare monitor output to Physio-Control LifePak defibrillator input.

i cable ECG. 9 pin ‘Defib/Sync’ output of the GE Carescape One monitor or PDM module to the LifePak defibrillator LP12, LP15, LP20, LP20e with code Management module, 12 pin ECG input.

Part #: ME583

Adapts the Physio Control LifePak or Zoll Medical defibrillator blood pressure input to accept a Philips Healthcare invasive pressure cable.

i cable IBP Adapter. 12 pin Philips blood pressure cable adapted to mate with LifePak LP12, LP15 or Zoll X, M Series defibrillators, MS 6 pin IBP input. When tethered to the defibrillator, it enables a compatible connection for speedy diagnosis and delivery of care.

Part #: ME590260

Connects GE Healthcare monitor output to Zoll Medical defibrillator input.

i cable ECG. 7 pin mini DIN ‘Defib Sync’ output of the GE monitor to Zoll X, R or M Series defibrillator, AAMI 6 pin ECG input.

Part #: ME590185

Connects GE Healthcare monitor output to Zoll Medical defibrillator input.

i cable ECG. 9 pin ‘Defib/Sync’ output of GE Carescape One monitor or PDM module to Zoll X, R or M Series, AAMI 6 pin patient ECG input.

Part #: ME550LP20E

Adapts Physio-Control LifePak 20/20e defibrillator output to Cardiac Rhythm Management Pacer Programmer cables.

i cable ECG Adapter.  DB15HD output of LifePak LP20 and LP20e defibrillator with code management module adapted to mate with CRM pacemaker programmer cables via the 1/4″ two circuit phone jack.  See also our versatile multi-defibrillator adapter, part# ME550DFB3.