On many popular products
Speak to our experts
Safe & Secure checkout
We accept Purchase Orders
On many popular products
Speak to our experts
Safe & Secure checkout
We accept Purchase Orders
$215
i cable ECG. 1/4″ phone plug output from the Philips monitor or Maquet-Datascope balloon pump to the Zoll R, X and M series defibrillator ECG input. Also from the Philips monitor to the balloon pump input or ultrasound, AAMI 6 pin ECG input. Compatible with MAGUIRE 257 Series Multipliers or MAGUIRE 414 Series Boom Cabling System, each designed to deliver synchronized waveforms and simultaneous signal transfer onto multiple device displays. Learn how these low cost products simplify patient setup, reduce cable clutter and enhance any physiologic monitoring system.
| Dimensions | 14 ft |
|---|---|
| Signal Type | |
| Connects from (signal source - output) | Maquet-Datascope balloon pump – all models, Philips Healthcare monitor |
| Connects to (signal destination - input) | |
| Compatible with (OEM) |
Connects the Physio-Control and Zoll Medical defibrillator outputs to CRM Pacer Programmer cables.
i cable ECG Adapter. 7 pin ‘Sync In/Marker Out‘ of Zoll R Series defibrillator (model #AF14B034866 and higher or older models which were retrofitted with the female ECG output connector) adapted to mate with CRM pacemaker programmer cables via the 1/4″ two circuit phone jack. See also our multi-defibrillator adapter, part# ME550DFB3.
This unique Operating Room Boom Cabling System uses the surgical equipment booms to connect the anesthesia device to peripheral monitors. The kit includes 100 feet of cable which runs overhead from one surgical boom to another remote boom arm. Also included are two custom engraved Thermoplastic Duplex Cover Plates which are color coded for signal identification. This system requires a device specific MAGUIRE 410 Series Anesthesia monitor cable, purchased separately. Also purchased separately are the accessory cables which connect the remote wall jacks to your additional monitors such as a defibrillator, balloon pump, ultrasound, continuous cardiac output monitor, and similar monitors. Additional remote boom wall plates with cable are available and easily expand the system. Click here for an image of this unique system installed in the CVOR.
i cable IBP. Output of the Edwards TruWave disposable transducer cable to the LifePak LP12, LP15 or Zoll X, M Series defibrillator, MS 6 pin IBP input.
i cable ECG or IBP Multiplier. 1/4″ three circuit ECG output of the Philips monitor, Maquet-Datacope balloon pump or other 1/4″ output to be three parallel phone jacks. Allows simultaneous connection to defibrillator, balloon pump, ultrasound, pacer programmer, cardiac output or other connected physiologic monitor. This multiplier not only expands the device’s single analog output, it can also expand the output of a MAGUIRE 257 Series multiplier or 414 Series Boom Cabling System. Use this product in combination with MAGUIRE multiplier cables to deliver ECG or IBP signal to desirable peripheral monitors. (excluding the bifurcated dual signal cable). Learn how these low cost products simplify patient setup, reduce cable clutter and enhance any physiologic monitoring system.
i cable ECG & IBP Multiplier. 9 pin ‘Defib/Sync’ output of GE Carescape One monitor or PDM module adapted to be 1/4″ two circuit phone jacks, 4 ECG and 2 IBP outputs. Allows simultaneous connection to defibrillator, balloon pump, ultrasound, pacer programmer, cardiac output or other connected physiologic monitor. Use this product in combination with MAGUIRE multiplier cables to deliver ECG and IBP signal to desirable peripheral monitors. Learn how these low cost products simplify patient setup, reduce cable clutter and enhance any physiologic monitoring system.
i cable ECG & IBP Multiplier. 7 pin mini DIN output of GE monitor adapted to be 1/4″ two circuit phone jacks, 4 ECG and 2 IBP outputs. Allows simultaneous connection to defibrillator, balloon pump, ultrasound, pacer programmer, continuous cardiac output or other connected physiologic monitor. Use this product in combination with MAGUIRE multiplier cables to deliver ECG and IBP signal to desirable peripheral monitors. Learn how these low cost products simplify patient setup, reduce cable clutter and enhance any physiologic monitoring system.
i cable IBP Adapter. 12 pin Philips blood pressure cable adapted to mate with LifePak LP12, LP15 or Zoll X, M Series defibrillators, MS 6 pin IBP input. When tethered to the defibrillator, it enables a compatible connection for speedy diagnosis and delivery of care.
i cable ECG. 7 pin ‘Sync In/Marker Out’ of Zoll R Series Defibrillator (model #AF14B034866 and higher or older models which were retrofitted with the female ECG output connector) to balloon pump or ultrasound, AAMI 6 pin ECG input.
i cable ECG & IBP Multiplier. 1/4″ ECG and 1/8″ BP bifurcated cable output of Philips Healthcare monitor and module adapted to be 1/4″ two circuit phone jacks, 4 ECG and 2 IBP outputs. Allows simultaneous connection to defibrillator, balloon pump, ultrasound, pacer programmer, continuous cardiac output or other connected physiologic monitor. Use this product in combination with MAGUIRE multiplier cables to deliver ECG and IBP signal to desirable peripheral monitors. Learn how these low cost products simplify patient setup, reduce cable clutter and enhance any physiologic monitoring system.
i cable IBP. 9 pin Hypertronics low level blood pressure output of Datascope CS300 or Maquet Cardiosave balloon pump to the LifePak defibrillator LP12, LP15, LP20, LP20e with Code Management Module, or Zoll X, M Series defibrillators, MS 6 pin IBP input. Uses the BP transducer of the balloon pump to provide pressure information to the defibrillator.
i cable ECG Adapter. 12 pin Philips ECG patient cable adapted to mate with ZOLL X, R, M series defibrillator, AAMI 6 pin ECG input. When tethered to the defibrillator or defibrillator crash cart, it enables a compatible connection for speedy diagnosis and delivery of care.
