Showing all 11 results

Show sidebar
Part #: ME590006K

Connects Philips Healthcare monitor or Maquet-Datascope balloon pump to Physio Control LifePak defibrillator input.

i cable ECG. 1/4″ phone plug output of the Philips monitor or  balloon pump to the LifePak defibrillator LP12, LP15, LP20, LP20e with code management module, 12 pin ECG input. This cable is also compatible with MAGUIRE 257 Series Multipliers and MAGUIRE 414 Series Boom Cabling System, each designed to deliver synchronized waveforms and simultaneous signal transfer onto multiple peripheral device displays. Learn how these low cost products simplify patient setup, reduce cable clutter and enhance any physiologic monitoring system.

Part #: ME550DFB3
Part #: ME590030K5

Adapts the Physio Control LifePak defibrillator patient input to accept a Philips Healthcare 5 wire patient cable.

i cable ECG Adapter. 12 pin end of the Philips Healthcare 5-wire ECG patient cable adapted to LifePak defibrillator LP12, LP15, LP20, LP20e with Code Management Module, 12 pin patient ECG input. When tethered to the defibrillator, it enables a compatible connection for speedy diagnosis and delivery of care.  NOTE: This adapter does not work with the 3-WIRE patient cable. Use instead part# ME590030K3 with a 3-WIRE patient cable.

Part #: ME590185K

Connects GE Healthcare monitor output to Physio-Control LifePak defibrillator input.

i cable ECG. 9 pin ‘Defib/Sync’ output of the GE Carescape One monitor or PDM module to the LifePak defibrillator LP12, LP15, LP20, LP20e with code Management module, 12 pin ECG input.

Part #: ME550LP20E

Adapts Physio-Control LifePak 20/20e defibrillator output to Cardiac Rhythm Management Pacer Programmer cables.

i cable ECG Adapter.  DB15HD output of LifePak LP20 and LP20e defibrillator with code management module adapted to mate with CRM pacemaker programmer cables via the 1/4″ two circuit phone jack.  See also our versatile multi-defibrillator adapter, part# ME550DFB3.

 

Part #: ME590030K3

Adapts the Physio Control LifePak defibrillator ECG patient input to accept a Philips Healthcare 3 wire patient cable.

i cable ECG Adapter. Allows the use of a Philips Healthcare 3-WIRE, 12 pin patient ECG cable with the Physio-Control LifePak 12, 15, 20 and 20e. Philips 12 pin ECG adapted to be Physio-Control 12 pin. NOTE: This adapter does not work with the 5-WIRE patient cable. Use instead part# ME590030K5 with a 5-WIRE patient cable.

Part #: ME590261

Connects GE Healthcare monitor output to Physio Control LifePak defibrillator input.

i cable ECG. 7 pin mini DIN “Defib Sync” output  of the GE monitor to LifePak defibrillator LP12, LP15, LP20, LP20e with Code Management Module, 12 pin patient ECG input.

Part #: ME590036K

Connects Spacelabs module output to Physio Control LifePak defibrillator input.

i cable ECG.  TT253 ‘HLo’ output of the Spacelabs module to LifePak defibrillator LP12, LP15, LP20, LP20e with Code Management Module, 12 pin patient ECG input.

Part #: ME590008BX

Connects Physio-Control LifePak LP12, LP15 defibrillator output to Philips Healthcare monitor, ultrasound input.

i cable ECG.  7 pin output of the LifePak LP12 and LP15 defibrillator to Philips Healthcare monitor and ultrasound, 12 pin patient ECG input.

Part #: ME5902305

Adapts the Physio Control LifePak defibrillator input to accept a GE Healthcare patient cable.

i cable Adapter. Allows the use of a GE Healthcare 5 wire patient cable with the Physio-Control LifePak LP12, LP15, LP20, and LP20e defibrillator. GE Healthcare 11 pin ECG adapted to be Physio-Control 12 pin.

Part #: ME590090N

Connects Physio Control LifePak LP20 to Biotronik pacer programmer input.

i cable ECG. DB15HD output of Physio-Control Lifepak LP20 defibrillator to Biotronik Renamic and ICS 3000 Pacer Programmer ECG input.