Showing 1–12 of 14 results

Show sidebar
Part #: ME590257P

Adapts GE Healthcare monitor single output to be multiple phone jack outputs.

i cable ECG & IBP Multiplier. 9 pin ‘Defib/Sync’ output of GE Carescape One monitor or PDM module adapted to be  1/4″ two circuit phone jacks, 4 ECG and 2 IBP outputs. Allows simultaneous connection to defibrillator, balloon pump, ultrasound, pacer programmer, cardiac output or other connected physiologic monitor. Use this product in combination with MAGUIRE multiplier cables to deliver ECG and IBP signal to desirable peripheral monitors. Learn how these low cost products simplify patient setup, reduce cable clutter and enhance any physiologic monitoring system.

Part #: ME590221

Adapts Philips Healthcare monitor or Maquet-Datascope balloon pump single output to be three outputs..

i cable ECG or IBP Multiplier. 1/4″ three circuit ECG output of the Philips monitor, Maquet-Datacope balloon pump or other 1/4″ output to be three parallel phone jacks. Allows simultaneous connection to defibrillator, balloon pump, ultrasound, pacer programmer, cardiac output or other connected physiologic monitor. This multiplier not only expands the device’s single analog output, it can also expand the output of a MAGUIRE 257 Series multiplier or 414 Series Boom Cabling System. Use this product in combination with MAGUIRE multiplier cables to deliver ECG or IBP signal to desirable peripheral monitors. (excluding the bifurcated dual signal cable).  Learn how these low cost products simplify patient setup, reduce cable clutter and enhance any physiologic monitoring system.

Part #: ME590257F

Adapts GE Healthcare monitor single output to be multiple phone jack outputs.

i cable ECG & IBP Multiplier. 7 pin mini DIN output of GE monitor adapted to be  1/4″ two circuit phone jacks, 4 ECG and 2 IBP outputs. Allows simultaneous connection to defibrillator, balloon pump, ultrasound, pacer programmer, continuous cardiac output or other connected physiologic monitor. Use this product in combination with MAGUIRE multiplier cables to deliver ECG and IBP signal to desirable peripheral monitors. Learn how these low cost products simplify patient setup, reduce cable clutter and enhance any physiologic monitoring system.

Part #: ME550LP20E

Adapts Physio-Control LifePak 20/20e defibrillator output to Cardiac Rhythm Management Pacer Programmer cables.

i cable ECG Adapter.  DB15HD output of LifePak LP20 and LP20e defibrillator with code management module adapted to mate with CRM pacemaker programmer cables via the 1/4″ two circuit phone jack.  See also our versatile multi-defibrillator adapter, part# ME550DFB3.

 

Part #: ME590257S

Adapts Philips Healthcare monitor & BP module single output to be multiple phone jack outputs.

i cable ECG & IBP Multiplier. 1/4″ (6.35mm) ECG  and 1/8″ (3.5mm) IBP bifurcated cable output of Philips Healthcare monitor and module adapted to be  1/4″ (6.35mm) two circuit phone jacks, 4 ECG and 2 IBP outputs. Allows simultaneous connection to defibrillator, balloon pump, ultrasound, pacer programmer, continuous cardiac output or other connected physiologic monitor. Use this product in combination with MAGUIRE multiplier cables to deliver ECG and IBP signal to desirable peripheral monitors. Learn how these low cost products simplify patient setup, reduce cable clutter and enhance any physiologic monitoring system.

Part #: ME550MDR

Adapts Draeger Medical monitor output to Cardiac Rhythm Management Pacer Programmer cables.

i cable ECG Adapter. 14 pin MDR output of Draeger Delta or Delta XL monitor (not including the AXIOM SENSIS) adapted to mate with CRM pacemaker programmer cable via the 1/4″ two circuit phone jack. Use in tandem with 1/4″ phone plug pacer programmer cables. This adapter also enables connection to other physiologic monitors via 1/4″ phone plug accessory cables.

Part #: ME550SL

Adapts Spacelabs Healthcare module output to Cardiac Rhythm Management Pacer Programmer cables.

i cable ECG Adapter.  TT253 ‘HLo’ output of the Spacelabs module adapted to mate with CRM pacemaker programmer cable via the 1/4″ two circuit phone jack. Use in tandem with 1/4″ phone plug pacer programmer cables. This adapter also enables connection to other physiologic monitors via 1/4″ phone plug accessory cables.

Part #: ME550PDM

Adapts GE Healthcare monitor output to Cardiac Rhythm Management Pacer Programmer cables.

i cable ECG Adapter. 9 pin ‘Defib/Sync’ output of GE Carescape One monitor or PDM module adapted to mate with CRM pacemaker programmer cable via the 1/4″ two circuit phone jack. Use in tandem with 1/4″ phone plug pacer programmer cables. This adapter also enables connection to other physiologic monitors via 1/4″ phone plug accessory cables.

Part #: ME5507DIN

Adapts GE Healthcare monitor output to Cardiac Rhythm Management Pacer Programmer cables.

i cable ECG Adapter. 7 pin mini DIN output of GE monitor adapted to mate with CRM pacemaker programmer cable via the 1/4″ two circuit phone jack. Use in tandem with 1/4″ phone plug pacer programmer cables. This adapter also enables connection to other physiologic monitors via 1/4″ phone plug accessory cables.

Part #: ME590257H

Adapts Draeger Siemens monitor single output to be multiple phone jack outputs.

i cable ECG & IBP Multiplier.  14 pin MDR output of Draeger Siemens SC7000, SC8000, SC9000, Infinity Delta Series and M540 Monitors (not including Axiom Sensis) adapted to be 1/4″ two circuit phone jacks, 4 ECG and 2 IBP outputs. Allows simultaneous connection to defibrillator, balloon pump, ultrasound, pacer programmer, cardiac output or other connected physiologic monitor. Use this product in combination with MAGUIRE multiplier cables to deliver ECG and IBP signal to desirable peripheral monitors. NOTE: Connection from M540 monitor requires adapter #MS20662 available from Draeger. Learn how these low cost products simplify patient setup, reduce cable clutter and enhance any physiologic monitoring system.

 

Part #: ME590257J

Adapts Spacelabs Healthcare monitor single output to be multiple phone jack outputs.

i cable ECG & IBP Multiplier.  HLO (J10) DB15HD output of the Spacelabs monitor adapted to be  1/4″ two circuit phone jacks, 4 ECG and 2 IBP outputs. Allows simultaneous connection to defibrillator, balloon pump, ultrasound, pacer programmer, continuous cardiac output or other connected physiologic monitor. Use this product in combination with MAGUIRE multiplier cables to deliver ECG and IBP signal to desirable peripheral monitors. Learn how these low cost products simplify patient setup, reduce cable clutter and enhance any physiologic monitoring system.

Part #: ME590257

Adapts GE Healthcare monitor single output to be multiple phone jack outputs.

i cable ECG & IBP Multiplier. 4 pin LEMO output of GE Healthcare S5 monitor adapted to be  1/4″ two circuit phone jacks, 4 ECG and 2 IBP outputs. Allows simultaneous connection to defibrillator, balloon pump, ultrasound, pacer programmer, continuous cardiac output or other connected physiologic monitor. Use this product in combination with MAGUIRE multiplier cables to deliver ECG and IBP signal to desirable peripheral monitors. Learn how these low cost products simplify patient setup, reduce cable clutter and enhance any physiologic monitoring system.