IBP Interconnect products enable you to transfer invasive blood pressure signal and waveform between equipment and systems to create the efficient integrated monitoring system.

Showing 1–12 of 14 results

Show sidebar
Part #: ME590180

Connects Maquet-Datascope balloon pump output (specific models) to Philips Healthcare monitor input.

i cable IBP. 9 pin Hypertronics Low-Level BP output of the Getinge Datascope CS300, Maquet CardioSave balloon pump to the Philips monitor, 12 pin input. Uses the BP transducer of the balloon pump to provide pressure information to the primary monitor.

Part #: ME590338J

Connects Philips Healthcare monitor or Maquet-Datascope balloon pump output to Edwards LifeSciences CCO monitor, or Philips-Siemens ultrasound input.

i cable ECG or IBP. 1/4″ phone plug output of the Philips monitor or balloon pump to Philips/Siemens ultrasound or Edwards LifeSciences Vigilance II , HemoSphere monitor, 1/4″ AUX ECG input.  Also connects the 1/4″ IBP output of the MAGUIRE 257 Series Multiplier or MAGUIRE 414 Series Boom Cabling System to the balloon pump, continuous cardiac output monitor or ultrasound, AUX ECG input. Maguire 257 and 414 Series Interconnect systems are designed to deliver synchronized waveforms and simultaneous signal transfer onto multiple device displays. Learn how these low cost products simplify patient setup, reduce cable clutter and enhance any physiologic monitoring system.

Part #: ME584F

Connects Edwards disposable transducer cable output to Physio Control LifePak or Zoll Medical defibrillator input.

i cable IBP. Output of the Edwards TruWave disposable transducer cable to the LifePak LP12, LP15 or Zoll X, M  Series defibrillator, MS 6 pin IBP input.

Part #: ME590027

Connects Spacelabs monitor output to Maquet-Datascope balloon pump, Edwards LifeSciences CCO monitor, or Philips-Siemens ultrasound input.

i cable ECG or IBP. TT253 ‘HLo’ output of the Spacelabs monitor module to balloon pump, AUX ECG or IBP. Also connects to Vigilance II, Hemosphere continuous cardiac output monitor or Philips Healthcare, Siemens ultrasound AUX ECG input,  1/4″ two circuit phone plug input.

Part #: ME585K

Connects Abbott / Hospira/ Medex / ICU Medical transducer cable output to Maquet-Datascope balloon pump input.

i cable IBP. Output of Abbott / Hospira, Medex, ICU Medical Transpac 4 transducer cable to Maquet-Datascope balloon pump monitors with IBP input (including the CS300).

Part #: ME590180E

Connects Maquet-Datascope balloon pump output (specific models) to GE Healthcare monitor input.

i cable IBP. 9 pin Hypertronics low level blood pressure output of Datascope CS300 or Maquet Cardiosave balloon pump to the GE Healthcare monitor input. Uses the BP transducer of the balloon pump to provide pressure information to the primary monitor.

Part #: ME590202F

Extends the 1/4″ phone plug cable connection.

i cable Extension. 1/4″ two circuit phone plug adapted to 1/4″ two circuit phone jack. For use with AUX ECG or IBP inputs. 6 foot length.

Part #: ME581

Adapts the Physio Control LifePak defibrillator invasive pressure input to accept a GE Healthcare pressure cable.

i cable IBP Adapter. 11 pin GE invasive blood pressure cable adapted to mate with LifePak LP12, LP15 or Zoll X, M Series defibrillator, MS 6 pin IBP input. When tethered to the defibrillator or defibrillator crash cart, it enables a compatible connection for speedy diagnosis and delivery of care.

Part #: ME583R

Adapts the Zoll Medical defibrillator input to accept a Philips Healthcare pressure cable.

i cable IBP Adapter.  Philips Healthcare 12 pin invasive blood pressure cable adapted to mate with the Zoll X and M Series defibrillator, MS 6 pin IBP input. When tethered to the defibrillator or defibrillator crash cart, it enables a compatible connection for speedy diagnosis and delivery of care.

Part #: ME585J

Connects Abbott / Hospira/ Medex / ICU Medical transducer cable output to Draeger Medical monitor input.

i cable IBP. Output of Abbott / Hospira, Medex, ICU Medical Transpac 4 transducer cable to Draeger Infinity Series monitor, IBP input. Requires the use of Draeger #5731281E530U IBP Y cable.

Part #: ME585F

Connects Abbott / Hospira/ Medex / ICU Medical transducer cable output to Physio-Control or Zoll Medical defibrillator input.

i cable IBP. Output of the Abbott / Hospira Transpac 4 blood pressure transducer cable to the Physio-Control LifePak LP12, LP15, or Zoll X. M series defibrillators, MS 6 pin IBP input.

Part #: ME590180M

Connects Maquet-Datascope balloon pump (specific models) to Physio Control LifePak and Zoll Medical defibrillator input.

i cable IBP. 9 pin Hypertronics low level blood pressure output of Datascope CS300 or Maquet Cardiosave balloon pump to the LifePak defibrillator LP12, LP15, LP20, LP20e with Code Management Module,  or Zoll X, M Series defibrillators, MS 6 pin IBP input. Uses the BP transducer of the balloon pump to provide pressure information to the defibrillator.