Alarm Nurse Call Cables for Monitors are essential for providing safe care to patients in many health care settings. These cable products connect the alarm output of a physiologic monitor to the hospital’s central station alarm monitoring system. The typical nurse call system input is located at the headwall jack near the patient bedside. A single headwall jack can be expanded to accommodate three alarmed devices with our Alarm Input Multiplier. This product accepts a patient monitor, ventilator, infusion pump, pulse oximeter or similar medical device equipped with an alarm output.

Showing all 7 results

Show sidebar
Part #: ME590142E

Connects Hospira/Abbott infusion pump or Masimo monitor, pulse oximeter alarm output to the nurse call headwall jack.

i cable Nurse Call.  1/4″ two circuit phone plug alarm output of Hospira/Abbott Plum A infusion pump or Masimo ROOT monitor, Rad 8, Rad 87 pulse oximeter to a 1/4″ two circuit right angle phone plug. Some device settings will determine open/closed status. When used with a normally open system protocol this device alarm cable is compatible with the Maguire Device Alarm Input Multiplier, which expands the headwall jack to allow simultaneous monitoring of up to three devices.

Part #: ME59A142E

Connects Masimo monitor or pulse oximeter alarm output to Amplion Alert alarm monitoring system input.

i cable Nurse Call AMPLION.  1/4″ 2 circuit phone plug alarm output of Masimo ROOT Monitor, Rad 8 and Rad 87 Pulse Oximeter to Amplion Care Assurance System or Amplion Legacy RAM/RID System, 1/4″ 2 circuit right angle phone plug. Device settings will determine open/closed status. Amplion Alert Pulse Ox (Blue).

Part #: ME590152

Connects Covidien, Philips, Welch Allyn monitors alarm outputs to the nurse call headwall jack.

i cable Nurse Call. 1/8″ three circuit normally open alarm output of Covidien Oridion Capnostream 20 CO2 monitor, Philips SureSigns VSi, VS2, VS3, VS4 and Welch Allyn VSM 6000 monitors to a 1/4″ two circuit right angle phone plug. This device alarm cable is compatible with the Maguire Device Alarm Input Multiplier, which expands the headwall jack to allow simultaneous monitoring of up to three devices.

Part #: ME590134F

Connects Spacelabs monitor alarm output to the nurse call headwall jack.

i cable Nurse Call. 14 pin MDR normally open alarm output of Spacelabs 91369, 91370 or 90387 monitor to a 1/4″ two circuit right angle phone plug. This device alarm cable is compatible with the Maguire Device Alarm Input Multiplier, which expands the headwall jack to allow simultaneous monitoring of up to three devices.

Part #: ME590133R

Connects Spacelabs monitor alarm output to the nurse call headwall jack.

i cable Nurse Call. RJ12 normally open alarm output of Spacelabs 90385 monitor to a 1/4″ two circuit right angle phone plug. This device alarm cable is compatible with the Maguire Device Alarm Input Multiplier, which expands the headwall jack to allow simultaneous monitoring of up to three devices.

Part #: ME590200F

Connects Respironics Criterion Sleep System monitor alarm output to the nurse call headwall jack.

i cable Nurse Call. DB9 normally open alarm output of Respironics Criterion 40 airway pressure diagnostic sleep system monitor to a 1/4″ two circuit right angle phone plug. This device alarm cable is compatible with the Maguire Device Alarm Input Multiplier, which expands the headwall jack to allow simultaneous monitoring of up to three devices.

Part #: ME590142L

Connects Masimo ROOT monitor alarm output to the nurse call headwall jack.

i cable Nurse Call. 1/4″ two circuit right angle normally open alarm output of Masimo ROOT patient monitor to a 1/4″ two circuit right angle phone plug. This device alarm cable is compatible with the Maguire Device Alarm Input Multiplier, which expands the headwall jack to allow simultaneous monitoring of up to three devices.