The 414 Series Boom Cabling System is our most efficient method of establishing an integrated physiologic monitoring arrangement in the operating room. By running cables overhead through the OR surgical equipment booms, this system of interconnect better manages the cable clutter typically found across the surgical floor. Similar in concept to our 257 Series Output Multiplier, this system of interconnect allows you to expand the analog output port of the anesthesia monitor and enable simultaneous connection to numerous peripheral devices: defibrillator, balloon pump, continuous cardiac output monitor, ultrasound, pacemaker programmer and other similar monitoring devices. The Boom Cabling System works in tandem with Multiplier Accessory Cablesto deliver ECG and IBP signal to critical monitors. Expect this system to reduce the number of redundant sets of patient cables and electrodes connected at the patient. Having fewer connected cables, simplifies patient setup for staff and improves the patient experience too.