On many popular products
Speak to our experts
Safe & Secure checkout
We accept Purchase Orders
$227
i cable ECG Extension. 6 pin AAMI patient cable extended for ECG patient cables. 6 foot length.
| Dimensions | 6 ft |
|---|---|
| Signal Type | |
| Connects from (signal source - HOST output) | |
| Compatible with (OEM) |
i cable ECG Adapter. Allows the use of a GE Healthcare 3 or 5 wire patient ECG cable with the Zoll M, R or X Series defibrillator. GE Healthcare 11 pin ECG adapted to be Zoll 6 pin AAMI.
i cable ECG. TT253 ‘HLo’ output of Spacelabs Healthcare monitor to Zoll Medical defibrillator or Maquet-Datascope balloon pump, 6 pin AAMI patient ECG input.
i cable IBP Adapter. 11 pin GE invasive blood pressure cable adapted to mate with LifePak LP12, LP15 or Zoll X, M Series defibrillator, MS 6 pin IBP input. When tethered to the defibrillator or defibrillator crash cart, it enables a compatible connection for speedy diagnosis and delivery of care.
i cable ECG. 1/4″ phone plug output from the Philips monitor or Maquet-Datascope balloon pump to the Zoll R, X and M series defibrillator ECG input. Also from the Philips monitor to the balloon pump input or ultrasound, AAMI 6 pin ECG input. This cable is compatible with MAGUIRE 257 Series Multipliers and MAGUIRE 414 Series Boom Cabling System, each designed to deliver synchronized analog audio waveforms and simultaneous signal transfer onto multiple peripheral device displays. Learn how these low cost products simplify patient setup, reduce cable clutter and enhance any physiologic monitoring system.
i cable ECG Adapter. AAMI 6 pin Zoll ECG patient cable adapted to mate with GE Healthcare monitor, 11 pin ECG input (not including S5 and S6 monitors). When tethered to the monitor, it enables a compatible connection for continuous vital signs monitoring.
i cable Extension. 1/8″ (3.5mm) temperature probe adapted to 1/4″ (6.35mm) phone plug temperature input.
i cable ECG Extension. 11 pin GE patient cable extended for 3 wire, 5 wire or 10 wire ECG cables. 6 foot length.
i cable ECG. 9 pin ‘Defib/Sync’ output of GE Carescape One monitor or PDM module to Zoll X, R or M Series, AAMI 6 pin patient ECG input.
i cable ECG or IBP Multiplier. 1/8″ (3.5mm) three circuit phone plug IBP output of Philips blood pressure module or ECG output of the Zoll M Series defibrillator adapted to be three 1/4″ (6.35mm) phone jacks. Allows simultaneous connection to a defibrillator, balloon pump, ultrasound, pacer programmer or other physiologic monitor via MAGUIRE multiplier cables (excluding bifurcated dual signal cables). Learn how these low cost products simplify patient setup, reduce cable clutter and enhance any physiologic monitoring system.
i cable Extension. 1/4″ two circuit phone plug adapted to 1/4″ two circuit phone jack. For use with AUX ECG or IBP inputs. 6 foot length.
i cable ECG Adapter. 7 pin ‘Sync In/Marker Out‘ of Zoll R Series defibrillator (model #AF14B034866 and higher or older models which were retrofitted with the female ECG output connector) adapted to mate with CRM pacemaker programmer cables via the 1/4″ two circuit phone jack. See also our multi-defibrillator adapter, part# ME550DFB3.
i cable ECG. 6 pin LEMO output of the GE monitor to Zoll X, R or M Series, AAMI 6 pin ECG input.
i cable IBP. Output of the Edwards TruWave disposable transducer cable to the LifePak LP12, LP15 or Zoll X, M Series defibrillator, MS 6 pin IBP input.
i cable ECG. 1/8″ (3.5mm) two circuit phone plug output of Zoll Medical PD and M Series, CCT and Welch Allyn defibrillators to balloon pump, Vigilance II, Hemosphere continuous cardiac output monitor or Philips-Siemens ultrasound, 1/4″ (6.35mm) two circuit phone plug AUX ECG input.
Connects the Physio-Control and Zoll Medical defibrillator outputs to CRM Pacer Programmer cables.
