Showing all 9 results

Show sidebar
Part #: ME550DFB3

Output Adapter for use with Zoll Medical R Series and Physio-Control LifePak defibrillators.

Connects the Physio-Control and Zoll Medical defibrillator outputs to CRM Pacer Programmer cables.

Part #: ME590238E

Connects Puritan-Bennett ventilator alarm output to the nurse call headwall jack.

i cable Nurse Call. 4 pin Hirose normally open alarm output of  the Puritan Bennett 700, 740, 760, 840 or 980 series ventilator to a 1/4″ two circuit right angle phone plug. This device alarm cable is compatible with the Maguire Device Alarm Input Multiplier, which expands the headwall jack to allow simultaneous monitoring of up to three devices.

Part #: ME550ZRN

Adapts Zoll R Series defibrillator output to Cardiac Rhythm Management Pacer Programmer cables.

i cable ECG Adapter. 7 pin ‘Sync In/Marker Out‘ of Zoll R Series defibrillator (model #AF14B034866 and higher or older models which were retrofitted with the female ECG output connector) adapted to mate with CRM pacemaker programmer cables via the 1/4″ two circuit phone jack. See also our multi-defibrillator adapter, part# ME550DFB3.

Part #: ME550LP20E

Adapts Physio-Control LifePak 20/20e defibrillator output to Cardiac Rhythm Management Pacer Programmer cables.

i cable ECG Adapter.  DB15HD output of LifePak LP20 and LP20e defibrillator with code management module adapted to mate with CRM pacemaker programmer cables via the 1/4″ two circuit phone jack.  See also our versatile multi-defibrillator adapter, part# ME550DFB3.

 

Part #: ME590090F

Connects Philips Healthcare or 1/4″ phone plug output to Medtronic pacer programmer input.

i cable ECG. 1/4″ two circuit phone plug output of the Philips monitor to Medtronic 2090/9790 Pacer Programmer input. Compatible with MAGUIRE Multi-Defib Output Adapter. Also compatible with MAGUIRE 257 Series Multiplier or MAGUIRE 414 Series Boom Cabling System, each designed to deliver synchronized waveforms and simultaneous signal transfer onto the pacer programmer and multiple other device displays. Learn how these low cost products simplify patient setup, reduce cable clutter and enhance any physiologic monitoring system.

Part #: ME59A238

Connects Puritan-Bennett ventilator alarm output to Amplion (Care Assurance) alarm monitoring system input.

i cable Nurse Call AMPLION . 4 pin Hirose male normally closed alarm output of Puritan Bennett 700, 740, 760, 840 & 980 Series ventilators to the Amplion Care Assurance System, 1/4″ 2 circuit right angle phone plug. Amplion Alert Vent (green).

Part #: ME59A238E

Connects Puritan-Bennett ventilator alarm output to Amplion (Legacy) alarm monitoring system input.

i cable Nurse Call AMPLION.  4 pin Hirose male normally open alarm output of the Puritan Bennett 700, 740, 760, 840 or 980 series ventilator to the Amplion Legacy RAM/RID System platform, 1/4″ two circuit right angle phone plug. Amplion Alert Vent (green).

Part #: ME550MDR

Adapts Draeger Medical monitor output to Cardiac Rhythm Management Pacer Programmer cables.

i cable ECG Adapter. 14 pin MDR output of Draeger Delta or Delta XL monitor (not including the AXIOM SENSIS) adapted to mate with CRM pacemaker programmer cable via the 1/4″ two circuit phone jack. Use in tandem with 1/4″ phone plug pacer programmer cables. This adapter also enables connection to other physiologic monitors via 1/4″ phone plug accessory cables.

Part #: ME550SL

Adapts Spacelabs Healthcare module output to Cardiac Rhythm Management Pacer Programmer cables.

i cable ECG Adapter.  TT253 ‘HLo’ output of the Spacelabs module adapted to mate with CRM pacemaker programmer cable via the 1/4″ two circuit phone jack. Use in tandem with 1/4″ phone plug pacer programmer cables. This adapter also enables connection to other physiologic monitors via 1/4″ phone plug accessory cables.