Same Day Shipping
On many popular products
- Shop Products
Tech Support
Speak to our experts
Total Security
Safe & Secure checkout
hospitals
We accept Purchase Orders
- Shop Your OEM
- About Us
- Helpful Resources
- Contact Us
Showing all 26 results
Ancillary Device Connections, Boom Cabling Systems, Defib Slave Cable, Defib slave cables & adapters, ECG Cables, Interconnect, Monitor slave cables-adapters, Multiplier Cables
Connects Philips Healthcare monitor or Maquet-Datascope balloon pump output to Zoll Medical defibrillator input or ultrasound input.
i cable ECG. 1/4″ phone plug output from the Philips monitor or Maquet-Datascope balloon pump to the Zoll R, X and M series defibrillator ECG input. Also from the Philips monitor to the balloon pump input or ultrasound, AAMI 6 pin ECG input. This cable is compatible with MAGUIRE 257 Series Multipliers and MAGUIRE 414 Series Boom Cabling System, each designed to deliver synchronized analog audio waveforms and simultaneous signal transfer onto multiple peripheral device displays. Learn how these low cost products simplify patient setup, reduce cable clutter and enhance any physiologic monitoring system.
Connects Edwards disposable transducer cable output to Physio Control LifePak or Zoll Medical defibrillator input.
i cable IBP. Output of the Edwards TruWave disposable transducer cable to the LifePak LP12, LP15 or Zoll X, M Series defibrillator, MS 6 pin IBP input.
Connects Maquet-Datascope balloon pump output (specific models) to Philips Healthcare monitor input.
i cable IBP. 9 pin Hypertronics Low-Level BP output of the Getinge Datascope CS300, Maquet CardioSave balloon pump to the Philips monitor, 12 pin input. Uses the BP transducer of the balloon pump to provide pressure information to the primary monitor.
Connects Nihon Kohden output to Maquet-Datascope balloon pump input.
i cable ECG. 5 pin output from the Nihon Kohden monitor to the Maquet-Datascope balloon pump, 1/4 AUX ECG input.
Connects GE Healthcare monitor output to Maquet-Datascope balloon pump or Philips Volcano Imaging System input.
i cable ECG & IBP. 9 pin ‘Defib/Sync’ output of GE Carescape One monitor or PDM module to CardioSave, CS100, CS300, or Arrow balloon pump or to Volcano S5 IVUS Imaging System, 1/4″ 2 circuit phone plug AUX ECG & IBP inputs.
Connects Spacelabs monitor output to Maquet-Datascope balloon pump, Edwards LifeSciences CCO monitor, or Philips-Siemens ultrasound input.
i cable ECG or IBP. TT253 ‘HLo’ output of the Spacelabs monitor module to balloon pump, AUX ECG or IBP. Also connects to Vigilance II, Hemosphere continuous cardiac output monitor or Philips Healthcare, Siemens ultrasound AUX ECG input, 1/4″ two circuit phone plug input.
Connects Abbott / Hospira/ Medex / ICU Medical transducer cable output to Maquet-Datascope balloon pump input.
i cable IBP – Abbott/Hospira, Medex, ICU Medical Transpac IV IBP transducer to Getinge/Maquet/Datascope monitors with 6 pin IBP input (Except Cardiosave).
Adapts the Physio Control LifePak or Zoll Medical defibrillator blood pressure input to accept a Philips Healthcare invasive pressure cable.
Adapter -Input- Philips Healthcare 12 pin IBP input to Physio-Control LifePak LP12, LP15; Zoll M, X and CCT Series Defibrillators MS 6 pin IBP input. 6 inch length.
Connects Philips Healthcare monitor and blood pressure module output to Maquet-Datascope balloon pump or Philips Volcano Imaging System inputs.
i cable ECG & IBP. 1/4″ (6.35mm) phone plug (green) and 1/8″ (3.5mm) phone plug (red) output of the Philips monitor with blood pressure module to the CardioSave, CS100, CS300, or Arrow balloon pump or to the Volcano S5 IVUS Imaging System, 1/4″ (6.35mm) phone plug AUX ECG & IBP inputs.
Connects Maquet-Datascope balloon pump output (specific models) to GE Healthcare monitor input.
i cable IBP. 9 pin Hypertronics low level blood pressure output of Datascope CS300 or Maquet Cardiosave balloon pump to the GE Healthcare monitor input. Uses the BP transducer of the balloon pump to provide pressure information to the primary monitor.
Connects GE Healthcare monitor output to Edwards LifeSciences CCO monitor input.
i cable ECG and IBP. 9 pin ‘Defib/Sync’ output of the GE Healthcare Monitor Carescape One and PDM module to Edwards Hemosphere or Vigilance II monitor as a 1/4″ (6.35mm) green phone plug AUX ECG and 1/8″ (3.5mm) red phone plug IBP inputs.
Connects GE Healthcare monitor output to Maquet-Datascope balloon pump or Philips Volcano Imaging System inputs.
i cable ECG & IBP. 7 pin mini DIN “Defib Sync” output of the GE monitor to CardioSave, CS100, CS300, or Arrow balloon pump or to Volcano S5 IVUS Imaging System, 1/4″ phone plug AUX ECG & IBP inputs.
Connects Maguire multiplier or Boom Cabling system outputs to Edwards LifeSciences monitor inputs.
i cable ECG & IBP. 1/4″ phone plug outputs of the MAGUIRE 257 Series Multiplier or MAGUIRE 414 Series Boom Cabling System to the Edwards Vigilance II or Hemosphere, 1/4″ two circuit red phone plug AUX ECG input and 1/8″ (3.5mm) green two circuit phone plug IBP input. Maguire Interconnect Systems are designed to deliver synchronized waveforms and simultaneous signal transfer onto multiple device displays. Learn how these low cost products simplify patient setup, reduce cable clutter and enhance any physiologic monitoring system.
Adapts the Physio Control and Zoll Medical defibrillator IBP input to accept a GE Healthcare invasive pressure cable.
i cable IBP Adapter. 11 pin GE invasive blood pressure cable adapted to mate with LifePak LP12, LP15 or Zoll X, M Series defibrillator, MS 6 pin IBP input. When tethered to the defibrillator or defibrillator crash cart, it enables a compatible connection for speedy diagnosis and delivery of care.
Connects Abbott / Hospira/ Medex / ICU Medical transducer cable output to Draeger Medical monitor input.
i cable IBP. Output of Abbott / Hospira, Medex, ICU Medical Transpac 4 transducer cable to Draeger Infinity Series monitor, IBP input. Requires the use of Draeger #5731281E530U IBP Y cable.
Connects Abbott / Hospira/ Medex / ICU Medical transducer cable output to Physio-Control or Zoll Medical defibrillator input.
i cable IBP. Output of the Abbott / Hospira Transpac 4 blood pressure transducer cable to the Physio-Control LifePak LP12, LP15, or Zoll X. M series defibrillators, MS 6 pin IBP input.
Connects Maquet-Datascope balloon pump output (specific models) to Draeger monitor input.
i cable IBP. 9 pin Hypertronics low level blood pressure output of Datascope CS300 or Maquet Cardiosave balloon pump to the Draeger Infinity Series monitor input (requires Draeger 5731281E530U IBP Y cable). Uses the BP transducer of the balloon pump to provide pressure information to the primary monitor.
Adapts Philips Healthcare monitor & BP module single output to be multiple phone jack outputs.
i cable ECG & IBP Multiplier. 1/4″ (6.35mm) ECG and 1/8″ (3.5mm) IBP bifurcated cable output of Philips Healthcare monitor and module adapted to be 1/4″ (6.35mm) two circuit phone jacks, 4 ECG and 2 IBP outputs. Allows simultaneous connection to defibrillator, balloon pump, ultrasound, pacer programmer, continuous cardiac output or other connected physiologic monitor. Use this product in combination with MAGUIRE multiplier cables to deliver ECG and IBP signal to desirable peripheral monitors. Learn how these low cost products simplify patient setup, reduce cable clutter and enhance any physiologic monitoring system.
Connects Spacelabs monitor output to Maquet-Datascope balloon pump of Philips Volcano Imaging System input.
i cable ECG & IBP. TT253 ‘HLo’ output of the Spacelabs module to balloon pump, 1/4″ AUX ECG & IBP inputs. Also connects to the Volcano S5 IVUS Imaging System, AUX ECG & IBP inputs.
Connects Philips Healthcare blood pressure module to Maquet-Datascope balloon pump input.
i cable IBP. 1/8″ (3.5mm) three circuit phone plug output of the Philips blood pressure module to the Maquet-Datascope balloon pump, 1/4″ (6.35mm) three circuit phone plug AUX IBP input.
Connects GE Healthcare monitor output to Maquet-Datascope balloon pump or Philips Volcano Imaging System inputs.
i cable GE Healthcare monitors 6 pin LEMO ECG output to the CardioSave CS100, CS300, Arrow balloon pumps, or Volcano S5 IVUS Imaging System, 1/4″ phone plug ECG & IBP inputs.
Connects Draeger Siemens monitor output to Maquet-Datascope balloon pump or Philips Volcano Imaging System input.
i cable Draeger Siemens SC7000, SC8000, SC9000, Infinity Delta Series Monitors (not including Axiom Sensis) 14 pin MDR output to the CardioSave CS100, CS300, Arrow balloon pumps, or Volcano S5 IVUS Imaging System, 1/4″ phone plug ECG & IBP inputs. NOTE: Connection from M540 monitor requires adapter #MS20662 available from Draeger.
Adapts Draeger Siemens monitor single output to be multiple phone jack outputs.
i cable ECG & IBP Multiplier. 14 pin MDR output of Draeger Siemens SC7000, SC8000, SC9000, Infinity Delta Series and M540 Monitors (not including Axiom Sensis) adapted to be 1/4″ two circuit phone jacks, 4 ECG and 2 IBP outputs. Allows simultaneous connection to defibrillator, balloon pump, ultrasound, pacer programmer, cardiac output or other connected physiologic monitor. Use this product in combination with MAGUIRE multiplier cables to deliver ECG and IBP signal to desirable peripheral monitors. NOTE: Connection from M540 monitor requires adapter #MS20662 available from Draeger. Learn how these low cost products simplify patient setup, reduce cable clutter and enhance any physiologic monitoring system.
Adapts Spacelabs Healthcare monitor single output to be multiple phone jack outputs.
i cable ECG & IBP Multiplier. HLO (J10) DB15HD output of the Spacelabs monitor adapted to be 1/4″ two circuit phone jacks, 4 ECG and 2 IBP outputs. Allows simultaneous connection to defibrillator, balloon pump, ultrasound, pacer programmer, continuous cardiac output or other connected physiologic monitor. Use this product in combination with MAGUIRE multiplier cables to deliver ECG and IBP signal to desirable peripheral monitors. Learn how these low cost products simplify patient setup, reduce cable clutter and enhance any physiologic monitoring system.
Adapts Philips IBP module or Zoll M Series defibrillator single ECG output to be three outputs.
i cable ECG or IBP Multiplier. 1/8″ (3.5mm) three circuit phone plug IBP output of Philips blood pressure module or ECG output of the Zoll M Series defibrillator adapted to be three 1/4″ (6.35mm) phone jacks. Allows simultaneous connection to a defibrillator, balloon pump, ultrasound, pacer programmer or other physiologic monitor via MAGUIRE multiplier cables (excluding bifurcated dual signal cables). Learn how these low cost products simplify patient setup, reduce cable clutter and enhance any physiologic monitoring system.
Adapts Nihon Kohden monitor analog output.
i cable ECG & IBP Adapter. This Nihon Kohden adapter is used to adapt the NK monitor to provide one ECG and one IBP signal via 1/4″ phone jacks. Use the adapter in tandem with the MAGUIRE 257 Series Output Multiplier System which allows simultaneous signal transfer to multiple devices via MAGUIRE multiplier interconnect cables.