Showing 31–60 of 94 results

Show sidebar
Part #: ME550PDM7

Adapts GE Healthcare monitor single output to be three outputs.

i cable ECG & IBP Multiplier. 9 pin ‘Defib/Sync’ output of GE Carescape One monitor or PDM module adapted to be three parallel 7 pin mini DIN ECG & IBP outputs.  Allows simultaneous connection to defibrillator, balloon pump, ultrasound, pacer programmer, cardiac output and other connected physiologic monitors via 7 pin mini DIN ancillary interconnect cables.

Part #: ME590257F

Adapts GE Healthcare monitor single output to be multiple phone jack outputs.

i cable ECG & IBP Multiplier. 7 pin mini DIN output of GE monitor adapted to be  1/4″ two circuit phone jacks, 4 ECG and 2 IBP outputs. Allows simultaneous connection to defibrillator, balloon pump, ultrasound, pacer programmer, continuous cardiac output or other connected physiologic monitor. Use this product in combination with MAGUIRE multiplier cables to deliver ECG and IBP signal to desirable peripheral monitors. Learn how these low cost products simplify patient setup, reduce cable clutter and enhance any physiologic monitoring system.

Part #: ME590260

Connects GE Healthcare monitor output to Zoll Medical defibrillator input.

i cable ECG. 7 pin mini DIN ‘Defib Sync’ output of the GE monitor to Zoll X, R or M Series defibrillator, AAMI 6 pin ECG input.

Part #: ME590185

Connects GE Healthcare monitor output to Zoll Medical defibrillator input.

i cable ECG. 9 pin ‘Defib/Sync’ output of GE Carescape One monitor or PDM module to Zoll X, R or M Series, AAMI 6 pin patient ECG input.

Part #: ME590265

Connects GE Healthcare monitor output to Maquet-Datascope balloon pump or Philips Volcano Imaging System inputs.

i cable ECG & IBP. 7 pin mini DIN “Defib Sync” output of the GE monitor to CardioSave, CS100, CS300, or Arrow balloon pump or to Volcano S5 IVUS Imaging System, 1/4″ phone plug AUX ECG & IBP inputs.

Part #: ME590202F

Extends the 1/4″ phone plug cable connection.

i cable Extension. 1/4″ two circuit phone plug adapted to 1/4″ two circuit phone jack. For use with AUX ECG or IBP inputs. 6 foot length.

Part #: ME550LP20E

Adapts Physio-Control LifePak 20/20e defibrillator output to Cardiac Rhythm Management Pacer Programmer cables.

i cable ECG Adapter.  DB15HD output of LifePak LP20 and LP20e defibrillator with code management module adapted to mate with CRM pacemaker programmer cables via the 1/4″ two circuit phone jack.  See also our versatile multi-defibrillator adapter, part# ME550DFB3.

 

Part #: ME590265H

Connects Maguire multiplier or Boom Cabling system outputs to Edwards LifeSciences monitor inputs.

i cable ECG & IBP. 1/4″ phone plug outputs of the MAGUIRE 257 Series Multiplier or MAGUIRE 414 Series Boom Cabling System to the Edwards Vigilance II or Hemosphere, 1/4″ two circuit red phone plug AUX ECG input and 1/8″ (3.5mm) green two circuit phone plug IBP input.  Maguire Interconnect Systems are designed to deliver synchronized waveforms and simultaneous signal transfer onto multiple device displays. Learn how these low cost products simplify patient setup, reduce cable clutter and enhance any physiologic monitoring system.

Part #: ME581

Adapts the Physio Control and Zoll Medical defibrillator IBP input to accept a GE Healthcare invasive pressure cable.

i cable IBP Adapter. 11 pin GE invasive blood pressure cable adapted to mate with LifePak LP12, LP15 or Zoll X, M Series defibrillator, MS 6 pin IBP input. When tethered to the defibrillator or defibrillator crash cart, it enables a compatible connection for speedy diagnosis and delivery of care.

Part #: ME590202

Extends and adapts the 1/8″ (3.5mm) temperature probe to connect to a 1/4″ (6.35mm) phone plug input.

i cable Extension. 1/8″ (3.5mm) temperature probe adapted to 1/4″ (6.35mm) phone plug temperature input.

Part #: ME583R

Adapts the Zoll Medical defibrillator input to accept a Philips Healthcare pressure cable.

i cable IBP Adapter.  Philips Healthcare 12 pin invasive blood pressure cable adapted to mate with the Zoll X and M Series defibrillator, MS 6 pin IBP input. When tethered to the defibrillator or defibrillator crash cart, it enables a compatible connection for speedy diagnosis and delivery of care.

Part #: ME590359

Connects Spacelabs Healthcare monitor output to the Zoll defibrillator input or balloon pump input.

i cable ECG. TT253 ‘HLo’ output of Spacelabs Healthcare monitor to Zoll Medical defibrillator or Maquet-Datascope balloon pump, 6 pin AAMI patient ECG input.

Part #: ME590030M5

Adapts the GE Healthcare patient input to accept a Philips Healthcare 5 wire patient cable.

i cable ECG Adapter. Allows the use of a Philips Healthcare 5 wire, 12 pin ECG patient cable with GE Healthcare monitor as 11 pin patient ECG input. Not compatible with the 3 wire patient cable.

Part #: ME590015P

Connects Draeger Medical monitor output to GE Healthcare monitor or ultrasound input (specific models).

i cable ECG. 14 pin MDR output of Draeger Siemens SC7000, SC8000, SC9000, Infinity Delta and M540 monitor (not including Axiom Sensis ) to all GE monitors and select ultrasound models: Vivid 5, 7, E9, E95, 11 pin patient ECG input. NOTE: connection from M540 monitor requires adapter #MS20662 available from Draeger.

Part #: ME585J

Connects Abbott / Hospira/ Medex / ICU Medical transducer cable output to Draeger Medical monitor input.

i cable IBP. Output of Abbott / Hospira, Medex, ICU Medical Transpac 4 transducer cable to Draeger Infinity Series monitor, IBP input. Requires the use of Draeger #5731281E530U IBP Y cable.

Part #: ME585F

Connects Abbott / Hospira/ Medex / ICU Medical transducer cable output to Physio-Control or Zoll Medical defibrillator input.

i cable IBP. Output of the Abbott / Hospira Transpac 4 blood pressure transducer cable to the Physio-Control LifePak LP12, LP15, or Zoll X. M series defibrillators, MS 6 pin IBP input.

Part #: ME579G

Extends the GE Healthcare 3, 5, or 10 wire patient cable.

i cable ECG Extension. 11 pin GE patient cable extended for 3 wire, 5 wire or 10 wire ECG cables. 6 foot length.

Part #: ME579

Extends the 6 pin AAMI patient cable.

i cable ECG Extension. 6 pin AAMI patient cable extended for ECG patient cables. 6 foot length.

Part #: ME590030K3

Adapts the Physio Control LifePak defibrillator ECG patient input to accept a Philips Healthcare 3 wire patient cable.

i cable ECG Adapter. Allows the use of a Philips Healthcare 3-WIRE, 12 pin patient ECG cable with the Physio-Control LifePak 12, 15, 20 and 20e. Philips 12 pin ECG adapted to be Physio-Control 12 pin. NOTE: This adapter does not work with the 5-WIRE patient cable. Use instead part# ME590030K5 with a 5-WIRE patient cable.

Part #: ME590258

Connects Witt Series monitor output to Zoll Medical defibrillator input.

i cable ECG. Witt Series IV monitors with digital front end, BNC output to Zoll M, R, or X Series defibrillator, AAMI 6 pin ECG input.

Part #: ME590032
Part #: ME590015J

Connects Draeger-Siemens monitor output to Zoll Medical defibrillator input.

i cable ECG. 14 pin MDR  output of the Draeger -Siemens SC7000, SC8000, SC9000, Infinity Delta Series and M540 monitors (not including Axiom Sensis ) to Zoll R, X or M Series defibrillator, AAMI 6 pin ECG input. NOTE: connection from M540 monitor requires adapter #MS20662 available from Draeger.

Part #: ME590301

Connects Zoll Medical M Series defibrillator output to Maquet-Datascope balloon pump input.

i cable ECG. 1/8″ two circuit phone plug output of the Zoll Medical PD and M Series, CCT or Welch Allyn defibrillators to the Getinge-Maquet-Datascope balloon pump or ultrasound, AAMI 6 pin ECG input.

Part #: ME590185F

Connects GE Healthcare monitor output to GE ultrasound input (specific models)

i cable ECG. 9 pin ‘Defib/Sync’ output of GE Carescape One monitor or PDM module to Vivid i or Vivid Q ultrasound, 7 pin Redel AUX ECG input.

Part #: ME590261

Connects GE Healthcare monitor output to Physio Control LifePak defibrillator input.

i cable ECG. 7 pin mini DIN “Defib Sync” output  of the GE monitor to LifePak defibrillator LP12, LP15, LP20, LP20e with Code Management Module, 12 pin patient ECG input.

Part #: ME590036K

Connects Spacelabs module output to Physio Control LifePak defibrillator input.

i cable ECG.  TT253 ‘HLo’ output of the Spacelabs module to LifePak defibrillator LP12, LP15, LP20, LP20e with Code Management Module, 12 pin patient ECG input.

Part #: ME590008BX

Connects Physio-Control LifePak LP12, LP15 defibrillator output to Philips Healthcare monitor, ultrasound input.

i cable ECG.  7 pin output of the LifePak LP12 and LP15 defibrillator to Philips Healthcare monitor and ultrasound, 12 pin patient ECG input.

Part #: ME590009X

Connects Zoll M Series defibrillator output to Philips Healthcare monitor, ultrasound input.

i cable ECG. 1/8″ (3.5mm) two circuit output of the Zoll PD and M defibrillator to the Philips monitor or ultrasound, 12 pin ECG input.

Part #: ME590359G

Connects Spacelabs Healthcare monitor output to GE Healthcare monitors or specific model ultrasound input.

i cable ECG.  TT253 ‘HLo’ output of Spacelabs modules to all GE monitors and select ultrasound models Vivid 5, 7, E9, E95, 11 pin patient ECG input.

Part #: ME590230G

Adapts the Zoll Medical defibrillator patient input to accept a GE Healthcare patient cable.

i cable ECG Adapter. Allows the use of a GE Healthcare 3 or 5 wire patient ECG cable with the Zoll M, R or X Series defibrillator. GE Healthcare 11 pin ECG adapted to be Zoll 6 pin AAMI.