Showing 61–90 of 132 results

Show sidebar
Part #: ME590030K3

Adapts the Physio Control LifePak defibrillator ECG patient input to accept a Philips Healthcare 3 wire patient cable.

i cable ECG Adapter. Allows the use of a Philips Healthcare 3-WIRE, 12 pin patient ECG cable with the Physio-Control LifePak 12, 15, 20 and 20e. Philips 12 pin ECG adapted to be Physio-Control 12 pin. NOTE: This adapter does not work with the 5-WIRE patient cable. Use instead part# ME590030K5 with a 5-WIRE patient cable.

Part #: ME590258

Connects Witt Series monitor output to Zoll Medical defibrillator input.

i cable ECG. Witt Series IV monitors with digital front end, BNC output to Zoll M, R, or X Series defibrillator, AAMI 6 pin ECG input.

Part #: ME590032
Part #: ME590015J

Connects Draeger-Siemens monitor output to Zoll Medical defibrillator input.

i cable ECG. 14 pin MDR  output of the Draeger -Siemens SC7000, SC8000, SC9000, Infinity Delta Series and M540 monitors (not including Axiom Sensis ) to Zoll R, X or M Series defibrillator, AAMI 6 pin ECG input. NOTE: connection from M540 monitor requires adapter #MS20662 available from Draeger.

Part #: ME590301

Connects Zoll Medical M Series defibrillator output to Maquet-Datascope balloon pump input.

i cable ECG. 1/8″ two circuit phone plug output of the Zoll Medical PD and M Series, CCT or Welch Allyn defibrillators to the Getinge-Maquet-Datascope balloon pump or ultrasound, AAMI 6 pin ECG input.

Part #: ME590185F

Connects GE Healthcare monitor output to GE ultrasound input (specific models)

i cable ECG. 9 pin ‘Defib/Sync’ output of GE Carescape One monitor or PDM module to Vivid i or Vivid Q ultrasound, 7 pin Redel AUX ECG input.

Part #: ME590261

Connects GE Healthcare monitor output to Physio Control LifePak defibrillator input.

i cable ECG. 7 pin mini DIN “Defib Sync” output  of the GE monitor to LifePak defibrillator LP12, LP15, LP20, LP20e with Code Management Module, 12 pin patient ECG input.

Part #: ME590036K

Connects Spacelabs module output to Physio Control LifePak defibrillator input.

i cable ECG.  TT253 ‘HLo’ output of the Spacelabs module to LifePak defibrillator LP12, LP15, LP20, LP20e with Code Management Module, 12 pin patient ECG input.

Part #: ME590008BX

Connects Physio-Control LifePak LP12, LP15 defibrillator output to Philips Healthcare monitor, ultrasound input.

i cable ECG.  7 pin output of the LifePak LP12 and LP15 defibrillator to Philips Healthcare monitor and ultrasound, 12 pin patient ECG input.

Part #: ME590009X

Connects Zoll M Series defibrillator output to Philips Healthcare monitor, ultrasound input.

i cable ECG. 1/8″ (3.5mm) two circuit output of the Zoll PD and M defibrillator to the Philips monitor or ultrasound, 12 pin ECG input.

Part #: ME590359G

Connects Spacelabs Healthcare monitor output to GE Healthcare monitors or specific model ultrasound input.

i cable ECG.  TT253 ‘HLo’ output of Spacelabs modules to all GE monitors and select ultrasound models Vivid 5, 7, E9, E95, 11 pin patient ECG input.

Part #: ME590230G

Adapts the Zoll Medical defibrillator patient input to accept a GE Healthcare patient cable.

i cable ECG Adapter. Allows the use of a GE Healthcare 3 or 5 wire patient ECG cable with the Zoll M, R or X Series defibrillator. GE Healthcare 11 pin ECG adapted to be Zoll 6 pin AAMI.

Part #: ME590132J

Connects Physio-Control LifePak LP12 and LP15 output to GE Healthcare monitors and specific ultrasound inputs.

i cable ECG. 9 pin Hypertronics output of Physio Control Defibrillator LP12 and LP15 to all GE monitors and select ultrasound models Vivid 5, 7, E9, E95 and Logiq Series, 11 pin patient ECG input.

Part #: ME590239H

Connects GE Healthcare stress test output to GE Healthcare monitors and specific ultrasound inputs.

i cable ECG. DB9 output of GE Case 8000, T2100 or Max 1 Stress Tester treadmill to all GE monitors and select ultrasound models Vivid 5, 7, E9, E95 and Logiq Series, 11 pin patient ECG input.

Part #: ME590180H

Connects Maquet-Datascope balloon pump output (specific models) to Draeger monitor input.

i cable IBP. 9 pin Hypertronics low level blood pressure output of Datascope CS300 or Maquet Cardiosave balloon pump to the Draeger Infinity Series monitor input (requires Draeger 5731281E530U IBP Y cable). Uses the BP transducer of the balloon pump to provide pressure information to the primary monitor.

Part #: ME590031L

Connects Philips Healthcare monitor or 1/4″ phone plug output to Boston Scientific pacer programmer input.

i cable ECG. 1/4″ two circuit phone plug output of the Philips monitor to Boston Scientific Zoom Programmer, AAMI 6 pin ECG input. This cable is compatible with MAGUIRE 257 Series Multipliers and MAGUIRE 414 Series Boom Cabling System, each designed to deliver synchronized waveforms and simultaneous signal transfer onto multiple peripheral device displays. Learn how these low cost products simplify patient setup, reduce cable clutter and enhance any physiologic monitoring system. Is also compatible with MAGUIRE Multi-Defib Output Adapter.

Part #: ME590090K

Connects Philips Healthcare monitor or 1/4″ phone plug output to Biotronik programmer input.

i cable ECG. 1/4″ two circuit phone plug output of the Philips monitor or other 1/4″ phono plug output to the Biotronik Renamic & ICS 3000 Pacer Programmer ECG input. This cable is compatible with MAGUIRE 257 Series Multipliers and MAGUIRE 414 Series Boom Cabling System, each designed to deliver synchronized waveforms and simultaneous signal transfer onto multiple peripheral device displays. Learn how these low cost products simplify patient setup, reduce cable clutter and enhance any physiologic monitoring system. Is also compatible with MAGUIRE Multi-Defib Output Adapter.

Part #: ME590184F

Connects Philips Healthcare monitor or Maquet-Datascope balloon pump output to GE Healthcare ultrasound input (select models).

i cable ECG. 1/4″ phone plug output of the Philips monitor or  balloon pump to GE ultrasound S5, S6, S60 and S70,  11 pin ECG input. Refer to part# ME590132 for connection to other  GE Healthcare models. This cable is compatible with MAGUIRE 257 Series Multipliers and MAGUIRE 414 Series Boom Cabling System, each designed to deliver synchronized waveforms and simultaneous signal transfer onto multiple peripheral device displays. Learn how these low cost products simplify patient setup, reduce cable clutter and enhance any physiologic monitoring system.

Part #: ME590271

Connects Physio-Control LifePak 20/20e output to GE Healthcare monitors and specific ultrasound inputs.

i cable ECG.  DB15HD ouput of the Physio-Control LifePak Defibrillator LP20e with code management module  to all GE Healthcare monitors and select ultrasound models Vivid 5, 7, E9, E95 and Logiq Series, 11 pin ECG patient input.

Part #: ME590269

Connects GE Healthcare monitor output to GE Healthcare monitor and ultrasound input (select models).

i cable ECG. 7 pin mini DIN ‘Defib Sync’ output  of GE monitor to all GE monitors and select ultrasound models Vivid 5, 7, E9, E95 and Logiq Series, 11 pin ECG patient input.

Part #: ME590132BRN

Connects Zoll R Series output to GE Healthcare monitors and specific ultrasound inputs.

i cable ECG.  7 pin ‘Sync In/Marker Out’ of Zoll R Series Defibrillator (model #AF14B034866 and higher or older models which were retrofitted with the female ECG output connector) to all GE monitors and select ultrasound models Vivid 5, 7, E9, E95 and Logiq Series, 11 pin patient ECG input.

Part #: ME590257S

Adapts Philips Healthcare monitor & BP module single output to be multiple phone jack outputs.

i cable ECG & IBP Multiplier. 1/4″ (6.35mm) ECG  and 1/8″ (3.5mm) IBP bifurcated cable output of Philips Healthcare monitor and module adapted to be  1/4″ (6.35mm) two circuit phone jacks, 4 ECG and 2 IBP outputs. Allows simultaneous connection to defibrillator, balloon pump, ultrasound, pacer programmer, continuous cardiac output or other connected physiologic monitor. Use this product in combination with MAGUIRE multiplier cables to deliver ECG and IBP signal to desirable peripheral monitors. Learn how these low cost products simplify patient setup, reduce cable clutter and enhance any physiologic monitoring system.

Part #: ME5902305

Adapts the Physio Control LifePak defibrillator input to accept a GE Healthcare patient cable.

i cable Adapter. Allows the use of a GE Healthcare 5 wire patient cable with the Physio-Control LifePak LP12, LP15, LP20, and LP20e defibrillator. GE Healthcare 11 pin ECG adapted to be Physio-Control 12 pin.

Part #: ME590265S

Connects Spacelabs monitor output to Maquet-Datascope balloon pump of Philips Volcano Imaging System input.

i cable ECG & IBP.  TT253 ‘HLo’ output of the Spacelabs module to balloon pump, 1/4″ AUX ECG & IBP inputs. Also connects to the Volcano S5 IVUS Imaging System, AUX ECG & IBP inputs.

Part #: ME590027L

Connects GE Healthcare monitor output to Maquet-Datascope balloon pump, Edwards LifeSciences CCO monitor, or Philips-Siemens ultrasound input.

i cable  ECG. 6 pin LEMO output of GE monitor to balloon pump, Vigilance II,  Hemosphere continuous cardiac output monitor, or Philips Healthcare and Siemens ultrasound, 1/4″ two circuit phone plug AUX ECG input.

Part #: ME590207

Adapts the GE Healthcare patient ECG input to accept a Zoll Medical patient cable.

i cable ECG Adapter. AAMI 6 pin Zoll ECG patient cable adapted to mate with GE Healthcare monitor, 11 pin ECG input (not including S5 and S6 monitors). When tethered to the monitor, it enables a compatible connection for continuous vital signs monitoring.

Part #: ME590333S

Connects Philips Healthcare blood pressure module to Maquet-Datascope balloon pump input.

i cable IBP. 1/8″ (3.5mm) three circuit phone plug output of the Philips blood pressure module to the Maquet-Datascope balloon pump, 1/4″ (6.35mm) three circuit phone plug AUX IBP input.

Part #: ME590090F

Connects Philips Healthcare or 1/4″ phone plug output to Medtronic pacer programmer input.

i cable ECG. 1/4″ two circuit phone plug output of the Philips monitor to Medtronic 2090/9790 Pacer Programmer input. This cable is compatible with MAGUIRE 257 Series Multipliers and MAGUIRE 414 Series Boom Cabling System, each designed to deliver synchronized waveforms and simultaneous signal transfer onto multiple peripheral device displays. Learn how these low cost products simplify patient setup, reduce cable clutter and enhance any physiologic monitoring system. Is also compatible with MAGUIRE Multi-Defib Output Adapter.

Part #: ME590239

Connects GE Healthcare stress tester treadmill output to Philips Healthcare or Siemens ultrasound input.

i cable ECG. DB9 output of the GE Case 8000, T2100 or Max 1 Stress Tester treadmill to Philips and Siemens ultrasounds, 1/4″ phone plug AUX ECG input.

Part #: ME590032P

Connects GE Healthcare monitor output to Maquet-Datascope balloon pump or Philips Volcano Imaging System inputs.

i cable GE Healthcare monitors 6 pin LEMO ECG output to the CardioSave CS100, CS300, Arrow balloon pumps, or Volcano S5 IVUS Imaging System, 1/4″ phone plug ECG & IBP inputs.