Showing 1–12 of 17 results

Show sidebar
Part #: ME550DFB3

Output Adapter for use with Zoll Medical R Series and Physio-Control LifePak defibrillators.

Connects the Physio-Control and Zoll Medical defibrillator outputs to CRM Pacer Programmer cables.

Part #: ME590006K

Connects Philips Healthcare monitor or Maquet-Datascope balloon pump to Physio Control LifePak defibrillator input.

i cable ECG. 1/4″phone plug output of the Philips monitor or  balloon pump to the LifePak defibrillator LP12, LP15, LP20, LP20e with code management module, 12 pin ECG input. Compatible with MAGUIRE 257 Series Multipliers or MAGUIRE 414 Series Boom Cabling System, each designed to deliver synchronized waveforms and simultaneous signal transfer onto multiple device displays. Learn how these low cost products simplify patient setup, reduce cable clutter and enhance any physiologic monitoring system.

Part #: ME584F

Connects Edwards disposable transducer cable output to Physio Control LifePak or Zoll Medical defibrillator input.

i cable IBP. Output of the Edwards TruWave disposable transducer cable to the LifePak LP12, LP15 or Zoll X, M  Series defibrillator, MS 6 pin IBP input.

Part #: ME590030K5

Adapts the Physio Control LifePak defibrillator patient input to accept a Philips Healthcare 5 wire patient cable.

i cable ECG Adapter. 12 pin end of the Philips Healthcare 5-wire ECG patient cable adapted to LifePak defibrillator LP12, LP15, LP20, LP20e with Code Management Module, 12 pin patient ECG input. When tethered to the defibrillator, it enables a compatible connection for speedy diagnosis and delivery of care.  NOTE: This adapter does not work with the 3-WIRE patient cable. Use instead part# ME590030K3 with a 3-WIRE patient cable.

Part #: ME590185K

Connects GE Healthcare monitor output to Physio-Control LifePak defibrillator input.

i cable ECG. 9 pin ‘Defib/Sync’ output of the GE Carescape One monitor or PDM module to the LifePak defibrillator LP12, LP15, LP20, LP20e with code Management module, 12 pin ECG input.

Part #: ME583

Adapts the Physio Control LifePak or Zoll Medical defibrillator blood pressure input to accept a Philips Healthcare invasive pressure cable.

i cable IBP Adapter. 12 pin Philips blood pressure cable adapted to mate with LifePak LP12, LP15 or Zoll X, M Series defibrillators, MS 6 pin IBP input. When tethered to the defibrillator, it enables a compatible connection for speedy diagnosis and delivery of care.

Part #: ME550LP20E

Adapts Physio-Control LifePak 20/20e defibrillator output to Cardiac Rhythm Management Pacer Programmer cables.

i cable ECG Adapter.  DB15HD output of LifePak LP20 and LP20e defibrillator with code management module adapted to mate with CRM pacemaker programmer cables via the 1/4″ two circuit phone jack.  See also our versatile multi-defibrillator adapter, part# ME550DFB3.

 

Part #: ME581

Adapts the Physio Control LifePak defibrillator invasive pressure input to accept a GE Healthcare pressure cable.

i cable IBP Adapter. 11 pin GE invasive blood pressure cable adapted to mate with LifePak LP12, LP15 or Zoll X, M Series defibrillator, MS 6 pin IBP input. When tethered to the defibrillator or defibrillator crash cart, it enables a compatible connection for speedy diagnosis and delivery of care.

Part #: ME590030K3

Adapts the Physio Control LifePak defibrillator ECG patient input to accept a Philips Healthcare 3 wire patient cable.

i cable ECG Adapter. Allows the use of a Philips Healthcare 3-WIRE, 12 pin patient ECG cable with the Physio-Control LifePak 12, 15, 20 and 20e. Philips 12 pin ECG adapted to be Physio-Control 12 pin. NOTE: This adapter does not work with the 5-WIRE patient cable. Use instead part# ME590030K5 with a 5-WIRE patient cable.

Part #: ME590261

Connects GE Healthcare monitor output to Physio Control LifePak defibrillator input.

i cable ECG. 7 pin mini DIN “Defib Sync” output  of the GE monitor to LifePak defibrillator LP12, LP15, LP20, LP20e with Code Management Module, 12 pin patient ECG input.

Part #: ME590036K

Connects Spacelabs module output to Physio Control LifePak defibrillator input.

i cable ECG.  TT253 ‘HLo’ output of the Spacelabs module to LifePak defibrillator LP12, LP15, LP20, LP20e with Code Management Module, 12 pin patient ECG input.

Part #: ME590180M

Connects Maquet-Datascope balloon pump (specific models) to Physio Control LifePak and Zoll Medical defibrillator input.

i cable IBP. 9 pin Hypertronics low level blood pressure output of Datascope CS300 or Maquet Cardiosave balloon pump to the LifePak defibrillator LP12, LP15, LP20, LP20e with Code Management Module,  or Zoll X, M Series defibrillators, MS 6 pin IBP input. Uses the BP transducer of the balloon pump to provide pressure information to the defibrillator.